Trading edge system

If you need an Indicator or Signal developed or translated from other language, please post all Indicator development REQUESTS to this section here.

Moderator: admin

Trading edge system

Postby andrea.2k » Fri Jan 17, 2014 3:20 pm

Hello,
I'm andrea.2k http://www.dailyfx.com/forex_forum/members/184126-andrea-2k/from "Dailyfx Italy" forum and would ask you to develope two custom indicators.

One is started on the path of the previous "krivo index" http://fxcodebase.com/code/viewtopic.php?f=17&t=59670and "strong vs weak" http://74.52.98.35/code/viewtopic.php?f=17&t=59804&p=90692for trading station, and the second is like "cluster indicator CCFp" http://codebase.mql4.com/5862 for MT4, both with the same following inputs.

The system works with a basket of 8 majors currencies ( AUD,CAD,CHF,EUR,GBP,JPY,NZD,USD ), so on 28 pairs.

For each couple XXX:YYY the instruments are :
F = FAST MOVING AVERAGE ( I use EMA8, but you can put the choice with MVA or others if you like )
M = MEDIUM MOVING AVERAGE ( EMA21 as default )
S = SLOW MOVING AVERAGE ( EMA55 sa default )
R = ROC INDICATOR ( 8 period as default )
RS = ROC SIGNAL LINE ( I use EMA8, but you can put the choice with MVA or others if you like )
These are the parameters of the indicator :
IF F > M > S THEN XXX = +3 , YYY = -3
IF F < M > S THEN XXX = +2 , YYY = -1
IF F < M < S THEN XXX = -3 , YYY = +3
IF F > M < S THEN XXX = -1 , YYY = +2

IF R > RS > 0 LINE THEN XXX = +3 , YYY = -3
IF R < RS > 0 LINE THEN XXX = +2 , YYY = -1
IF R < RS < 0 LINE THEN XXX = -3 , YYY = +3
IF R > RS < 0 LINE THEN XXX = -1 , YYY = +2

The final scores should be displayed on the top corner , with customizable colored lines that shows historical data to notice the trends of each currency and when they cross each other.

Put the choice to show only the two currencies of the referring pair excluding the others from the visual but not from the calculations as in this chart with CCFp http://www.mql5.com/en/charts/1308450/cadjpy-h4-oanda-corporation

The name of the indicator, if possible, should be "Andrea_2k_trading_edge"

I apologize in advance if I have not given you enough informations, but this is the first time I ask for this stuff.

I Would be grateful for your approval and feel free to contact me for any explanation.

Best regards
andrea.2k
 
Posts: 12
Joined: Sun Dec 29, 2013 7:06 pm

Re: Trading edge system

Postby Apprentice » Sun Jan 19, 2014 3:55 am

Your request is added to the development list.
User avatar
Apprentice
FXCodeBase: Confirmed User
 
Posts: 36341
Joined: Thu Dec 31, 2009 11:59 am
Location: Zagreb, Croatia

Re: Trading edge system

Postby Apprentice » Mon Jan 20, 2014 6:09 am

The first part of requested can be found here.
viewtopic.php?f=17&t=60218
User avatar
Apprentice
FXCodeBase: Confirmed User
 
Posts: 36341
Joined: Thu Dec 31, 2009 11:59 am
Location: Zagreb, Croatia

Re: Trading edge system

Postby andrea.2k » Mon Jan 20, 2014 6:38 am

Apprentice wrote:The first part of requested can be found here.
viewtopic.php?f=17&t=60218


Thanks a lot, you've been very fast and sharp as usual.

The only difference with my request is in the show selector : my idea was to be able to hide automatically the currencies that are not present in the tab/chart.
In this way you should not select again everytime you change the pair on that tab.
Otherwise you should take 28 tabs opened, but it slows the platform so much.

By the way it's just an improvement of practical use.

Thanks again
Andrea.2k
andrea.2k
 
Posts: 12
Joined: Sun Dec 29, 2013 7:06 pm

Re: Trading edge system

Postby andrea.2k » Mon Jan 20, 2014 10:45 am

Apprentice wrote:The first part of requested can be found here.
viewtopic.php?f=17&t=60218


Thanks a lot, you've been very fast and sharp as usual.

The only difference with my request is in the "show" selector parameters:

my idea was to be able to hide automatically the useless currencies ; a sort of flaggable "Show only pair on chart" = yes/no

In this way you should not select the currencies you look at everytime you change the pair on that tab.

Otherwise you should take 28 tabs opened, but it slows the platform so much.

By the way it's just an improvement of practical use.

Thanks again
Andrea.2k
andrea.2k
 
Posts: 12
Joined: Sun Dec 29, 2013 7:06 pm

Re: Trading edge system

Postby andrea.2k » Thu Jan 23, 2014 4:28 pm

Please confirm you've added my request to develope list , and still waiting for MT4 version.

Thank you.
andrea.2k
 
Posts: 12
Joined: Sun Dec 29, 2013 7:06 pm

Re: Trading edge system

Postby Apprentice » Sat Jan 25, 2014 4:08 am

Yes, we have, unfortunately, i have a pretty busy week.
User avatar
Apprentice
FXCodeBase: Confirmed User
 
Posts: 36341
Joined: Thu Dec 31, 2009 11:59 am
Location: Zagreb, Croatia

Re: Trading edge system

Postby andrea.2k » Thu Feb 27, 2014 1:24 pm

Dear sirs,
while expecting you finish the job...

IMPORTANT!
Put the choice to hide automatically the currencies that are not present in the tab/chart.
In this way you should not select again everytime you change the pair on that tab.
Otherwise you should take 28 tabs opened, but it slows the platform so much.
Put the choice to plot the index for a defined number of candles in order to get it lighter on the marketscope.

Waiting for your response, best regards
Last edited by andrea.2k on Thu Mar 26, 2015 6:35 am, edited 1 time in total.
andrea.2k
 
Posts: 12
Joined: Sun Dec 29, 2013 7:06 pm

Re: Trading edge system

Postby andrea.2k » Mon Mar 24, 2014 12:36 pm

May I ask the developers a feedback about the status of my request?

Thanks and best regards
andrea.2k
 
Posts: 12
Joined: Sun Dec 29, 2013 7:06 pm

Re: Trading edge system

Postby andrea.2k » Fri Apr 04, 2014 12:17 pm

What's the matter with my indicator?
I've been sistematically ignored :!:

Is there any technical reason?

It would be kind if you reply this time, thanks.
andrea.2k
 
Posts: 12
Joined: Sun Dec 29, 2013 7:06 pm

Next

Return to Indicator and Signal Requests

Who is online

Users browsing this forum: No registered users and 7 guests