SMI levels

If you need an Indicator or Signal developed or translated from other language, please post all Indicator development REQUESTS to this section here.

Moderator: admin

Re: SMI levels

Postby Carimwell » Wed Jan 03, 2018 9:30 pm

To clarify, I do use the heatmap previously developed in response to an earlier request, and I'm grateful for it, but there are two issues with it:
1. the Alert only applies to the OB/OS levels, not the slope of the line which would be useful;
2. While the OB/OS alert works, the colours for slope up/down seem to work for the selection of SMI/Signal line only for the first slot and for the remaining slots the slope seems to apply to the Signal line even if it is the SMI line that is chosen..

Thanks for your help guys!
Carimwell
 
Posts: 13
Joined: Mon Sep 04, 2017 10:11 pm

Re: SMI levels

Postby Apprentice » Fri Jan 05, 2018 6:13 am

Something like this?
MTF MCP SMI Heat Map with Alert.Carimwell.lua
(16.83 KiB) Downloaded 62 times
User avatar
Apprentice
FXCodeBase: Confirmed User
 
Posts: 18981
Joined: Thu Dec 31, 2009 11:59 am
Location: Zagreb, Croatia

Re: SMI levels

Postby Carimwell » Mon Jan 08, 2018 3:24 am

I have just downloaded this indicator Apprentice and it certainly does look as though it will work. I will test it extensively and report back.

Many many thanks!
Carimwell
 
Posts: 13
Joined: Mon Sep 04, 2017 10:11 pm

Re: SMI levels

Postby Carimwell » Wed Jan 10, 2018 1:27 am

Thankyou very much for this heatmap Apprentice. Could it possibly be modified to indicate the slope of the Data line, rather than the Signal line. Or if it is easier, provide the user with a choice of which line to use, like the previous heatmap?

Again many thanks for a very useful indicator.
Carimwell
 
Posts: 13
Joined: Mon Sep 04, 2017 10:11 pm

Re: SMI levels

Postby Apprentice » Wed Jan 10, 2018 2:21 pm

For MTF MCP SMI Heat Map with Alert.Carimwell.lua
You want the slope, SMI / Signal line menu?
User avatar
Apprentice
FXCodeBase: Confirmed User
 
Posts: 18981
Joined: Thu Dec 31, 2009 11:59 am
Location: Zagreb, Croatia

Re: SMI levels

Postby Carimwell » Wed Jan 10, 2018 8:52 pm

Yes please. Or if that is too complex to construct, just make the slope indicator based on the SMI Data line, not the Signal line.
Thanks heaps!
Carimwell
 
Posts: 13
Joined: Mon Sep 04, 2017 10:11 pm

Re: SMI levels

Postby Apprentice » Thu Jan 11, 2018 6:15 am

User avatar
Apprentice
FXCodeBase: Confirmed User
 
Posts: 18981
Joined: Thu Dec 31, 2009 11:59 am
Location: Zagreb, Croatia

Re: SMI levels

Postby Carimwell » Thu Jan 11, 2018 6:34 am

Fantastic, thanks very much for all your work Apprentice!
Cheers
Carimwell
Carimwell
 
Posts: 13
Joined: Mon Sep 04, 2017 10:11 pm

Previous

Return to Indicator and Signal Requests

Who is online

Users browsing this forum: No registered users and 9 guests