Zig high-low

[Apprentice]

Based on request.
viewtopic.php?f=27&t=70569

Zig high-low.lua

(6.65 KiB) Downloaded 308 times

[SANTOSH]

Dear Apprentice ,
Thanks for working on my request .

I checked the code , seems something is not correct here .
Last zig high /low which contains inside all the next zig high low was =
Last zig high - 1.12538
Last zig low - 1.11677

But as per the image its printing -
1.11933 (zig high) and 1.11713( zig low )


The print should be this as the request was :
Condition -
The zig highlow values should only update when
1. The new zig high is above the old zig high .
2. The new zig low is below the old zig low .
Otherwise it should not update .

Kindly check if anything is bugged .

Regards ,
Santosh .

[Apprentice]

Zig high-low.lua

(6.91 KiB) Downloaded 229 times

Try this version.

[SANTOSH]

Dear Team ,
Good work as always , working as expected .

Request for two updates :

Update # 1 :
Remove the lookback setting which is used in the menu as PERIOD , instead do the following :
a. Whenever there is a new zig low , the high print should be previous zig high .
b. Whenever there is a new zig high, the low print should be previous zig low .
Attached image .


Update# 2:
a. Count the number of bars after the new zig high or new zig low .
b. Reset the count at new zig high/low .
Attached image .

[Apprentice]

Your request is added to the development list.
Development reference 2253.

[SANTOSH]

Your request is added to the development list.
Development reference 2253.

.
Updates?

[Apprentice]

You have changed the definition a few times, will need clear specifications to continue.
Or this is an alternative version?
What will be high/low in a situation when the current zig-zag is lower than the previous zig-zag low.
The first zig zag lower than current?

[SANTOSH]

The attachment BABA.us H1 (11-12-2020 1143).png is no longer available

You have changed the definition a few times, will need clear specifications to continue.
Or this is an alternative version?
What will be high/low in a situation when the current zig-zag is lower than the previous zig-zag low.
The first zig zag lower than current?

1. When the current zig low is lower than the previous zig low do below ; otherwise dont do anything. Attached pic from your example .

High - Current Zig high
Low -Current Zig low
Count = No of bars after the confirmed Zig low .Reset the count whenever there is a change in the above High/ Low value .
Width = High - low
Ratio = Width/Count

Hope its clear now .

[Apprentice]

Zig high-low.lua

(6.85 KiB) Downloaded 236 times

Try this version.

[SANTOSH]

The attachment Zig high-low.lua is no longer available

Try this version.

BUG