Page 1 of 1

Slope direction line Signal

PostPosted: Wed Jul 14, 2010 1:32 pm
by Apprentice
SDL.png

SDL Signal.lua
(3.83 KiB) Downloaded 1301 times


To use this signal you need to download the updated slope direction line indicator.

http://fxcodebase.com/code/viewtopic.php?f=17&t=949&start=0

Re: Slope direction line Signal

PostPosted: Sun Nov 14, 2010 6:00 am
by sunshine
Hello Apprentice,

When adding this signal, I've get the error "The indicator with id SMA is not found."
It seems there is an error in these strings in the code:

Code: Select all
    strategy.parameters:addString("Method", "Method", "", "SMA");
    strategy.parameters:addStringAlternative("Method", "SMA", "", "SMA");


I suppose, "SMA" should be replaced with "MVA". Could you please update the signal in the first post?

Re: Slope direction line Signal

PostPosted: Sun Nov 14, 2010 7:13 am
by Apprentice
This is the question of compatibility.
I changed the indicator, but I forgot to changed signal.

It should work now.

Re: Slope direction line Signal

PostPosted: Wed Sep 14, 2011 8:22 am
by jackfx09
Tuning notes for SDLine and Oscillator.

I would suggest the following to enhance the signal, and therefore producing a Strategy, if possible:

1. Parameter setting for signal that would paint the VERTICAL LINE corresponding with an up trend (green)/down trend (red) when indicators are in harmony, such as I have shown on this chart.

2. Allow the user to select the "sensitivity" of the above said signal. For example, Autotrade function would trade on the premise: 1)SDL Oscillator bar used ALL in harmony 2)SD Lines ALL in harmony or 3)All SD Lines and Oscillator Bar in Harmony.


Thanks!

sjc

Re: Slope direction line Signal

PostPosted: Tue Sep 20, 2011 12:17 pm
by Coondawg71
any thoughts on this?